Skip to content
Menu
SynBioStandards
  • Home
  • Hot Water Cylinder
  • Heating System
  • Gas Leak
  • Thermostat
  • Plumbing
  • Get in Touch
SynBioStandards

Category: Central Heating

Vented and Unvented Hot Water Cylinder Installation & Repair in Derby

Posted on December 30, 2021

If you need a new water tank installed at home, don’t hesitate to get in touch with us on 01332 215555. We will be happy to send a helpful technician close by right away.

Vented and Unvented Hot Water Cylinder Services in Derby, UK

Water heaters are another necessity of life and like many other necessities, there are some pros and cons to consider as you think about which one best fits your needs. Two popular types of water heaters are gas or electric, so it is important to know the advantages and disadvantages of each before making a purchase because it can save you a lot of future trouble in the process.

Difference Between Vented and Unvented

Not all cylinders are the same. There are vented and unvented cylinders and they work slightly differently but each serves its own purpose. A vented cylinder incorporates a vented pipe which makes it correspond with the present atmospheric pressure. The mainstream water is delivered to a cold water storage tank, where it’s stored until it’s needed by an appliance in the house. Unvented cylinders function directly from the main water supply, although they’re still on the principle of gravity feed, unlike vented systems. This gives unvented cylinders a better flow than their counterparts.

Benefits of a Vented Cylinder

The benefit of venting hot water to the outside of your house is it is less expensive to maintain and install, and even easier to install. Although this venting method requires you to have a hand pump at times, it makes for an excellent option for homeowners that are on a limited budget as it is more economical and can also be used with solar heating systems as well. We provide maintenance, repairs, and installation services for both gas and electric indirect hot water cylinders on a range of makes including Worcester, Bosch, Vaillant, etc.

Benefits of an Unvented Cylinder

When you go for an installation of an unvented cylinder, then you enjoy a number of benefits. First, you have access to high-pressure water that isn’t affected by gravitational forces. So people who go with the unvented model don’t need to worry about the tank getting filled up or emptied. In fact, when bought at storage specialists in Coventry, it would be installed on any surface without necessarily requiring fixing.

This makes it very space-efficient and portable as compared to a vented version which needs a lot of space from your bathroom and is usually fixed to your wall. Although such models may prove slightly expensive in comparison, they come with many hygienic advantages not provided in the latter one. Our specialist plumbers are well trained when it comes to unvented cylinders and we know how to fulfil your requirements at a lower cost!

Installing a New Hot Water Cylinder

We will do whatever it takes to help you repair, maintain, and install your hot water system. We offer a wide range of services to fit everyone’s hot water needs from residential to commercial installations of all kinds. Whether you are looking for better efficiency in your current system or are eager to swap out an outdated one, our team of experts can help you with your project.

Just dial 01332 215555 and we will give you a quotation at No-Cost!

Continue Reading

Plumbers Derby – Power Flush Central Heating in London

Posted on December 30, 2021

Power Flush Central Heating in Derby

The boiler, this important part of your home heating can make or break a system. When renewing your original one, it’s important to follow the current Energy Saving Trust guidelines and thoroughly clean the interior according to the new standards laid out by the British Society for Testing and Materials (BS7593): 2006. Great industry practice dictates that you power flush the inner workings as a part of this overhaul process; however corrosion removal is required as well.

Why Power Flushing?

The best way to open up your heating pump is with a power flush, and this involves minimal disruption. Power flushing makes use of purpose-built pumps crafted specifically to solve boiler noise and circulation issues caused by ageing and other wear that affects central heating systems.

When power flushing a heating system, it is recommended to temporarily connect the pump of a power flushing machine to a heating system so that the movement of debris can be pushed out safely through any leaks. That’s because water travelling at a high velocity from the pump shifts the debris, which tends to get stuck in pipes, and then is ejected out of it before the accumulation creates real issues.

Radiators are flushing out impurities without being disconnected from the system, which allows for a quick reinstatement to natural circulation once the process is complete. The process used by Plumbers Derby is quite comprehensive and only performed by those who have been thoroughly vetted, making them an ideal company for your urgent plumbing needs.

Is Power Flushing Effective?

When you power flush a system, it is very effective in getting rid of hard-to-reach spots where you have corrosion from years of use but the key to this cleaning method’s effectiveness is knowing how long your pipes and fittings have been used. Its success can fare well when the piping system has already been subjected during heavy use for several years and that’s why it is recommended by our plumber that you rectify any problems with the pipes before entering into this particular cleaning procedure.

In fact, power flushing your system can remove residual scale, metal corrosion and other issues from surfaces within a certain distance from the source of water but it cannot undo signs of wear and aging! Without a doubt, regular maintenance save us money down the road in both time and money spent. It’s always good to know the solution to potential plumbing problems before they occur.

In many cases, leaky radiators are found to have been the result of a defective radiator valve. Although we carry out power flushing in order to ensure they’re all working correctly, the moving parts inside means that sometimes these valves can, unfortunately, become faulty after a few weeks or months of installing the radiators. This is something which could happen independently of whether or not you power flush your boiler.

Systems that have been left over time or not adequately treated may have corrosive particles and debris building up in various areas, like pipework or boilers as well as radiators that may stop functioning properly even after power-flushing.

You need to note that only a standard power flush is allowed for the quoted price. If any of the problems above or even similar problems come up after or during your power flush, we cannot be held responsible in any way. With that in mind, any further work needed would have to be done at an additional cost.

Why Hire Professionals For Your Power Flushing?

Plumbing can be tough, even the professionals, so it’s best to leave it to them. Do NOT try to fix leaks or blocked drains at home yourself – you could end up making a bad situation much worse. If you need plumbing work and drain desilting done at your home or business, Plumbers Derby will take care of all of the necessary repairs! Call us on 01332 215555 and we will give you a Free, No-Obligation Quote!

Continue Reading

Plumbers Derby – Thermostat and Central Heating Control Services in Derby

Posted on December 30, 2021

Thermostat and Central Heating Control Services in Derby

Plumbers Derby is a company providing top-tier plumbing services in Derby and across Derbyshire, offering Thermostat and Central Heating Control Services. Get the best price on our latest pricing system here today!

How does Thermostat work?

Thermostat is an automatic temperature control device that is used to maintain a constant temperature. It senses the temperature in a room and turns the heating on or off as needed to maintain the desired temperature. A thermostat is a simple device with two main components – the temperature sensor and the control mechanism.

In a typical central heating system, a thermostat is connected to a boiler via pipes. It will sense the temperature of the air coming from the boiler and switch the boiler on and off accordingly. Thermostats are usually set to a fixed temperature, and will not alter it until manually adjusted. Many thermostats use a bimetallic spring to sense the temperature, which will expand or contract depending on the temperature.

Thermostat Services in Derby, UK

Your central heating system and thermostat need to work together to give you the ideal temperature throughout the day. Our professional installers use smart thermostats which provide a level of control over your heating system to make sure it can adapt as required, for example, if there is an electrical failure related to your heating system which we are approved plumbers by trade so experienced in fixing.

Let Us Make Your Central Heating System Run Smoothly

No matter what kind of Thermostat you might have, it is necessary that you make sure your thermostat continues running smoothly via the help of the professionals at Plumbers Derby when performing regular maintenance. This means looking into a system that will include some parts such as radiators, boiler, heating pumps, and all fixtures and connections.

Taking these various facets into consideration when working with us means having a thorough demonstration of our commitment to excellence as legitimate heating experts to whom nothing but this makes us proud to call ourselves specialists in the field of heating systems!

Thermostat and Central Heating Control Services in Derby

We will also ensure that the heating system is able to keep operating efficiently as time goes on. When a heating system runs efficiently, it means lower energy bills for the homeowner, and of course, it also means fewer repairs. An excellent energy efficiency rating is also very advantageous to the environment, making several individuals happy.

As long as you trust in qualified heating engineers to handle your central heating maintenance, issues should not arise, and your heating system should continue working like new; another reason why we’ll happily provide you with any necessary recommendations! Your thermostat will be one of the major points of maintenance that we’ll address when working with our clients.

Call Us Right Away!

If your central system has been acting up and you think it might be the thermostat causing the problem, consider calling Plumbers Derby on 01332 215555 as we are Gas-safe Registered installers! We are experts in these areas, having answered many questions like yours over the years.

We look forward to working with you.

Continue Reading

Recent Posts

  • Vented and Unvented Hot Water Cylinder Installation & Repair in Derby
  • Plumbers Derby – Power Flush Central Heating in London
  • Plumbers Derby – Gas Leakage Repair Services In Derby
  • Plumbers Derby – Thermostat and Central Heating Control Services in Derby
  • Plumbers Derby – 6 Most Common Plumbing Issues and How to Fix them

Categories

  • Central Heating
  • Gas Leak Repair
  • Plumbing
©2025 SynBioStandards | All rights reserved